- Certs
- A&P, IA
- Aircraft
- Piston, Jet, Rotorcraft
- Service area
- 60 Miles
- Experience
- 10+ Years


Matt Holloway
Matt Holloway is an independent mobile A&P and IA mechanic in Gulfport, MS. Matt works on piston, turboprop and jet aircraft and helicopters up to 150 miles from Gulfport.
Gulfport, MS home baseUp to 150 miles service area
Service Area
Matt is based in Gulfport, Mississippi and provides mobile aircraft maintenance up to 150 miles away. The nearest airport is Gulfport-Biloxi International Airport (GPT), 3 miles away. Below are the airports serviced by Matt within 60 miles, nearest first.
- Home base
- Gulfport, MS
- Service area
- Up to 150 miles

Airports Serviced by Matt
Matt travels up to 150 milesOther Cities Served by Matt
Services Offered
Common maintenance on the aircraft Matt works on, at your hangar, tie-down or FBO.

Inspections
6 services- Annual Inspections
- 100-Hour Inspections
- Pre-Purchase Inspections
- Progressive Inspections
- Phase Inspections
- Borescope Inspections

Repairs
4 services- AOG Aircraft Repairs
- Engine Troubleshooting and Repair
- Engine Overhauls
- Sheet Metal Repair

Servicing
4 services- Lubrication & Servicing
- Landing Gear Servicing
- Flight Control Rigging
- Timed Component Replacement

Other Services
3 services- STC Installations
- AD Compliance
- Part 135 Maintenance
Aircraft Types
Matt works on piston, turboprop and jet aircraft and helicopters, including Cessna, Piper, Beechcraft, Cirrus, Mooney and Pilatus, at your hangar, tie-down or FBO.

Piston Aircraft
- Cessna
- Piper
- Beechcraft
- Cirrus
- Mooney

Turboprop Aircraft
- Beechcraft
- Pilatus
- Daher
- Cessna

Jet Aircraft
- Gulfstream
- Bombardier
- Dassault
- Cessna
- Boeing
- Embraer

Rotorcraft
- Robinson
- Bell
- Airbus Helicopters
Mechanic Bio
Matt Holloway is an independent A&P mechanic based in Gulfport, MS, with an Inspection Authorization (IA), so annual inspections are signed off on the spot. Matt also holds a commercial pilot certificate. Matt has 10+ years on piston, turboprop and jet aircraft and helicopters and works at your hangar, tie-down or FBO up to 150 miles from Gulfport.
In Matt's words
PROFESSIONAL AIRLINE PILOT PROVIDING PROFESSIONAL AND AFFORDABLE MAINTENANCE, ANNUALS, 100 HOUR, PRE-BUY, AOG, MANAGEMENT, AND CONSULTING. THOUSANDS OF HOURS AND EXPERIENCE IN GENERAL AVIATION AND TRANSPORT CATEGORY AIRCRAFT. TYPE RATINGS IN AIRBUS, BOEING, EMBREAR, HAWKER, AND BOMBARDIER. MOBILE A&P SERVICE FOR CESSNA, PIPER, BEECHCRAFT, CIRRUS, MOONEY, WARBIRDS, AND EXPERIMENTAL.
Certificates & Experience
- A&P Certified Mechanic
- Inspection Authorization (IA)
- Commercial Pilot (COM)
- 10+ years experience
Reviews
Help Matt. Leave a review.
We had a mechanical and battery issue at Gulfport airport while getting fuel. I met Matt while out on the apron. He came over immediately and started looking into what the issue was, even though he was working on another aircraft. We were able to figure out what the issue was. and were able to order the part overnight. Matt was amazing, very responsive, and definitely a true professional.
I would highly recommend him for any of your aviation mechanical needs. I would give him a 10 star if possible.!!!
When we got to the FBO and found a completely flat tire, Matt really saved the day! Stranded on a Sunday morning with no one available on the field, mobile Matt Holloway was there to help us.
He had us back in the air in no time! Super friendly and fair… I’d highly recommend him to all my fellow aviators! ✈️ Thank you, Matt for your GREAT service!👍🏻
Questions Owners Ask About Matt
Yes. An annual inspection has to be signed off by a mechanic with an Inspection Authorization (IA), and Matt holds one, so the annual can be inspected and signed off in one visit.
Matt travels up to 150 miles from Gulfport, MS. This page lists the airports within 60 miles: 16 public airports, the nearest Gulfport-Biloxi International Airport (GPT), 3 miles away. Search the list for yours. The work is done where the aircraft is: your hangar, tie-down or FBO.
Piston (Cessna, Piper, Beechcraft and others), turboprop (Beechcraft, Pilatus, Daher and others), jet (Gulfstream, Bombardier, Dassault and others) and rotorcraft (Robinson, Bell, Airbus Helicopters and others).
Call or email Matt with the buttons at the top of this page, or send a maintenance request with your aircraft, where it is and what it needs. A request takes about 2 minutes.
No. Matt is an independent mechanic listed on Phalanx Aviation, a marketplace that connects aircraft owners with independent A&P mechanics. Matt does the work and sets the price.
This listing was submitted by Matt or published with their permission, reviewed by Phalanx Aviation before going live, and never scraped from FAA records or other directories. How listings work · Is this your listing? Edit it on Grease Pilot
Request Maintenance — Gulfport, MS
Free and takes about 2 minutes. Mechanics contact you directly.
Mechanics Near Gulfport
More independent mechanics who serve Gulfport: Pro Members first, then the nearest.
- Certs
- A&P
- Aircraft
- Piston, Turbo-Prop, Jet, Rotorcraft
- Service area
- 60 Miles
- Experience
- 1+ Years
- Certs
- A&P
- Aircraft
- Piston, Turbo-Prop, Jet
- Service area
- 60 Miles
- Experience
- 10+ Years