A turboprop's polished four-blade propeller and open engine cowling below its cabin windows, in a hangar

Charles

Charles is an independent mobile A&P and IA mechanic in Gulfport, MS. Charles works on piston and jet aircraft and helicopters up to 60 miles from Gulfport.

Gulfport, MS home baseUp to 60 miles service area

Service Area

Charles is based in Gulfport, Mississippi and provides mobile aircraft maintenance up to 60 miles away. The nearest airport is Gulfport-Biloxi International Airport (GPT), 3 miles away. Below are the airports serviced by Charles, nearest first.

Home base
Gulfport, MS
Service area
Up to 60 miles
FAA VFR sectional chart centered on Gulfport, MS, Charles' home base, marked with a Phalanx Aviation pin, near Gulfport-Biloxi International Airport (GPT). The chart shows the airports and airspace around Gulfport.
Charles Service Area MapFAA VFR sectional chart · not for navigationView larger

Airports Serviced by Charles

The 16 public airports within 60 miles of Charles' base in Gulfport, MS, nearest first
AirportIDTownCountyMiles from Gulfport
Gulfport-Biloxi International AirportGPTGulfport, MSHarrison3 mi
Diamondhead Airport66YDiamondhead, MSHancock18 mi
Ocean Springs Airport5R2Ocean Springs, MSJackson20 mi
Stennis International AirportHSABay St Louis, MSHancock22 mi
Dean Griffin Memorial AirportM24Wiggins, MSStone33 mi
Trent Lott International AirportPQLPascagoula, MSJackson34 mi
Picayune Municipal AirportMJDPicayune, MSPearl River34 mi
Poplarville/Pearl River County AirportM13Poplarville, MSPearl River38 mi
Slidell AirportASDSlidell, LASt Tammany44 mi
St. Elmo Airport2R5St Elmo, ALMobile49 mi
I H Bass Jr. Memorial Airport4R1Lumberton, MSLamar50 mi
Roy E Ray Airport5R7Bayou La Batre, ALMobile53 mi
St. Tammany Regional AirportL31Covington, LASt Tammany54 mi
Mobile Regional AirportMOBMobile, ALMobile55 mi
George R Carr Memorial Air FieldBXABogalusa, LAWashington55 mi
Jeremiah Denton Airport4R9Dauphin Island, ALMobile58 mi

Other Cities Served by Charles

Services Offered

Common maintenance on the aircraft Charles works on, at your hangar, tie-down or FBO.

Cabin floor of a Beechcraft V35B Bonanza with the seats and floor panels removed for an annual inspection

Inspections

6 services
  • Annual Inspections
  • 100-Hour Inspections
  • Pre-Purchase Inspections
  • Progressive Inspections
  • Phase Inspections
  • Borescope Inspections
Close-up of a turboprop's four-blade propeller, spinner and exhaust stack, its engine cowling open

Repairs

4 services
  • AOG Aircraft Repairs
  • Engine Troubleshooting and Repair
  • Engine Overhauls
  • Sheet Metal Repair
Mechanic working on the exposed engine of a light aircraft

Servicing

4 services
  • Lubrication & Servicing
  • Landing Gear Servicing
  • Flight Control Rigging
  • Timed Component Replacement
Light aircraft instrument panel with a glass flight display, seen from the pilot's seat

Other Services

3 services
  • STC Installations
  • AD Compliance
  • Part 135 Maintenance

Aircraft Types

Charles works on piston and jet aircraft and helicopters, including Cessna, Piper, Beechcraft, Cirrus, Mooney and Gulfstream, at your hangar, tie-down or FBO.

Close-up of a piston aircraft engine's cylinders, rocker covers and fuel lines

Piston Aircraft

  • Cessna
  • Piper
  • Beechcraft
  • Cirrus
  • Mooney
Close-up of a business jet's engine nacelle

Jet Aircraft

  • Gulfstream
  • Bombardier
  • Dassault
  • Cessna
  • Boeing
  • Embraer
Technician wiping down a helicopter tail rotor blade in a hangar

Rotorcraft

  • Robinson
  • Bell
  • Airbus Helicopters

Mechanic Bio

Charles is an independent A&P mechanic based in Gulfport, MS, with an Inspection Authorization (IA), so annual inspections are signed off on the spot. Charles has 10+ years on piston and jet aircraft and helicopters and works at your hangar, tie-down or FBO up to 60 miles from Gulfport.

Certificates & Experience

  • A&P Certified Mechanic
  • Inspection Authorization (IA)
  • 10+ years experience

Reviews

No reviews yet. Has Charles worked on your aircraft?

Help Charles. Leave a review.

Questions Owners Ask About Charles

Yes. An annual inspection has to be signed off by a mechanic with an Inspection Authorization (IA), and Charles holds one, so the annual can be inspected and signed off in one visit.

Charles travels up to 60 miles from Gulfport, MS. That covers 16 public airports, the nearest Gulfport-Biloxi International Airport (GPT), 3 miles away. Search the list for yours. The work is done where the aircraft is: your hangar, tie-down or FBO.

Piston (Cessna, Piper, Beechcraft and others), jet (Gulfstream, Bombardier, Dassault and others) and rotorcraft (Robinson, Bell, Airbus Helicopters and others).

Send a maintenance request with your aircraft, where it is and what it needs. Free and takes about 2 minutes. Mechanics contact you directly.

No. Charles is an independent mechanic listed on Phalanx Aviation, a marketplace that connects aircraft owners with independent A&P mechanics. Charles does the work and sets the price.

This listing was submitted by Charles or published with their permission, reviewed by Phalanx Aviation before going live, and never scraped from FAA records or other directories. How listings work · Is this your listing? Edit it on Grease Pilot

Request Maintenance — Gulfport, MS

Free and takes about 2 minutes. Mechanics contact you directly.

Up to 25 MB per file. JPG, PNG, WebP, HEIC, PDF, TXT, DOC, DOCX. Photos are automatically resized for faster upload.

We'll set up a free Phalanx account with this email so you can track your request.

By submitting this form, you understand, have read, and agree to our Privacy Policy and Terms & Conditions.

Mechanics Near Gulfport

More independent mechanics who serve Gulfport: Pro Members first, then the nearest.

Matt HollowayBased in Gulfport
Pro MemberWhat's this

Pro Members pay to be part of the Phalanx Aviation network. It shows they're serious about their business and actively looking for work, so they're worth a closer look when you choose a mechanic.

Certs
A&P, IA, COM
Aircraft
Piston, Turbo-Prop, Jet, Rotorcraft
Service area
150 Miles
Experience
10+ Years
View Profile