A turboprop's polished four-blade propeller and open engine cowling below its cabin windows, in a hangar

Nathan

Nathan is an independent mobile A&P and IA mechanic in Winston-Salem, NC. Nathan works on piston and turboprop aircraft up to 50 miles from Winston-Salem.

Winston-Salem, NC home baseUp to 50 miles service area

Service Area

Nathan is based in Winston-Salem, North Carolina and provides mobile aircraft maintenance up to 50 miles away. The nearest airport is Smith Reynolds Airport (INT), 3 miles away. Below are the airports serviced by Nathan, nearest first.

Home base
Winston-Salem, NC
Service area
Up to 50 miles
FAA VFR sectional chart centered on Winston-Salem, NC, Nathan's home base, marked with a Phalanx Aviation pin, near Smith Reynolds Airport (INT). The chart shows the airports and airspace around Winston-Salem.
Nathan Service Area MapFAA VFR sectional chart · not for navigationView larger

Airports Serviced by Nathan

The 25 public airports within 50 miles of Nathan's base in Winston-Salem, NC, nearest first
AirportIDTownCountyMiles from Winston-Salem
Smith Reynolds AirportINTWinston Salem, NCForsyth3 mi
DS Butler Farm and AirfieldN83Oak Ridge, NCGuilford15 mi
Meadow Brook FieldN63Walnut Cove, NCStokes15 mi
Piedmont Triad International AirportGSOGreensboro, NCGuilford17 mi
Twin Lakes Airport8A7Mocksville, NCDavie18 mi
Hiatt AirportN97Thomasville, NCDavidson20 mi
Davidson County Executive AirportEXXLexington, NCDavidson22 mi
Air HarborW88Greensboro, NCGuilford25 mi
Lone Hickory Airport80CYadkinville, NCYadkin25 mi
Mount Airy/Surry County AirportMWKMount Airy, NCSurry30 mi
Rockingham County NC Shiloh AirportSIFReidsville, NCRockingham32 mi
Greensboro Executive Airport3A4Greensboro, NCGuilford33 mi
Elkin Municipal AirportZEFElkin, NCSurry33 mi
Mid-Carolina Regional AirportRUQSalisbury, NCRowan35 mi
Swan Creek Airport78AJonesville, NCYadkin36 mi
Kecks AirportN88Julian, NCGuilford36 mi
Asheboro Regional AirportHBIAsheboro, NCRandolph36 mi
Blue Ridge AirportMTVMartinsville, VAHenry39 mi
Hinshaw Airport (Greenacres)N61Liberty, NCAlamance43 mi
Burlington/Alamance Regional AirportBUYBurlington, NCAlamance43 mi
Statesville Regional AirportSVHStatesville, NCIredell46 mi
Stanly County AirportVUJAlbemarle, NCStanly47 mi
Wilkes County AirportUKFNorth Wilkesboro, NCWilkes49 mi
Siler City Municipal AirportSCRSiler City, NCChatham49 mi
Lake Norman Airpark14AMooresville, NCIredell50 mi

Other Cities Served by Nathan

Services Offered

Common maintenance on the aircraft Nathan works on, at your hangar, tie-down or FBO.

Cabin floor of a Beechcraft V35B Bonanza with the seats and floor panels removed for an annual inspection

Inspections

4 services
  • Annual Inspections
  • 100-Hour Inspections
  • Pre-Purchase Inspections
  • Borescope Inspections
Close-up of a turboprop's four-blade propeller, spinner and exhaust stack, its engine cowling open

Repairs

4 services
  • AOG Aircraft Repairs
  • Engine Troubleshooting and Repair
  • Engine Overhauls
  • Sheet Metal Repair
Light aircraft instrument panel with a glass flight display, seen from the pilot's seat

Other Services

3 services
  • STC Installations
  • AD Compliance
  • Part 135 Maintenance

Aircraft Types

Nathan works on piston and turboprop aircraft, including Cessna, Piper, Beechcraft, Cirrus, Mooney and Pilatus, at your hangar, tie-down or FBO.

Close-up of a piston aircraft engine's cylinders, rocker covers and fuel lines

Piston Aircraft

  • Cessna
  • Piper
  • Beechcraft
  • Cirrus
  • Mooney
Close-up of a turboprop's four-blade propeller, spinner and exhaust stack, its engine cowling open

Turboprop Aircraft

  • Beechcraft
  • Pilatus
  • Daher
  • Cessna

Mechanic Bio

Nathan is an independent A&P mechanic based in Winston-Salem, NC, with an Inspection Authorization (IA), so annual inspections are signed off on the spot. Nathan also holds a private pilot certificate. Nathan has 20+ years on piston and turboprop aircraft and works at your hangar, tie-down or FBO up to 50 miles from Winston-Salem.

Certificates & Experience

  • A&P Certified Mechanic
  • Inspection Authorization (IA)
  • Private Pilot (PPL)
  • 20+ years experience

Reviews

No reviews yet. Has Nathan worked on your aircraft?

Help Nathan. Leave a review.

Questions Owners Ask About Nathan

Yes. An annual inspection has to be signed off by a mechanic with an Inspection Authorization (IA), and Nathan holds one, so the annual can be inspected and signed off in one visit.

Nathan travels up to 50 miles from Winston-Salem, NC. That covers 25 public airports, the nearest Smith Reynolds Airport (INT), 3 miles away. Search the list for yours. The work is done where the aircraft is: your hangar, tie-down or FBO.

Piston (Cessna, Piper, Beechcraft and others) and turboprop (Beechcraft, Pilatus, Daher and others).

Send a maintenance request with your aircraft, where it is and what it needs. Free and takes about 2 minutes. Mechanics contact you directly.

No. Nathan is an independent mechanic listed on Phalanx Aviation, a marketplace that connects aircraft owners with independent A&P mechanics. Nathan does the work and sets the price.

This listing was submitted by Nathan or published with their permission, reviewed by Phalanx Aviation before going live, and never scraped from FAA records or other directories. How listings work · Is this your listing? Edit it on Grease Pilot

Request Maintenance — Winston-Salem, NC

Free and takes about 2 minutes. Mechanics contact you directly.

Up to 25 MB per file. JPG, PNG, WebP, HEIC, PDF, TXT, DOC, DOCX. Photos are automatically resized for faster upload.

We'll set up a free Phalanx account with this email so you can track your request.

By submitting this form, you understand, have read, and agree to our Privacy Policy and Terms & Conditions.

Mechanics Near Winston-Salem

More independent mechanics who serve Winston-Salem: Pro Members first, then the nearest.