A turboprop's polished four-blade propeller and open engine cowling below its cabin windows, in a hangar

Matthew

Matthew is an independent mobile A&P mechanic in Elizabeth City, NC. Matthew works on jet aircraft and helicopters up to 60 miles from Elizabeth City.

Elizabeth City, NC home baseUp to 60 miles service area

Service Area

Matthew is based in Elizabeth City, North Carolina and provides mobile aircraft maintenance up to 60 miles away. The nearest airport is Elizabeth City CG Air Station/Regional (ECG), 5 miles away. Below are the airports serviced by Matthew, nearest first.

Home base
Elizabeth City, NC
Service area
Up to 60 miles
FAA VFR sectional chart centered on Elizabeth City, NC, Matthew's home base, marked with a Phalanx Aviation pin, near Elizabeth City CG Air Station/Regional (ECG). The chart shows the airports and airspace around Elizabeth City.
Matthew Service Area MapFAA VFR sectional chart · not for navigationView larger

Airports Serviced by Matthew

The 16 public airports within 60 miles of Matthew's base in Elizabeth City, NC, nearest first
AirportIDTownCountyMiles from Elizabeth City
Elizabeth City CG Air Station/RegionalECGElizabeth City, NCPasquotank5 mi
Currituck County Regional AirportONXCurrituck, NCCurrituck15 mi
Northeastern Regional AirportEDEEdenton, NCChowan25 mi
Chesapeake Regional AirportCPKNorfolk, VAChesapeake26 mi
Suffolk Executive AirportSFQSuffolk, VASuffolk33 mi
Hampton Roads Executive AirportPVGNorfolk, VAChesapeake36 mi
First Flight AirportFFAKill Devil Hills, NCDare37 mi
Dare County Regional AirportMQIManteo, NCDare40 mi
Norfolk International AirportORFNorfolk, VANorfolk42 mi
Plymouth Municipal AirportPMZPlymouth, NCWashington44 mi
Donald's Air Park Inc7NCPlymouth, NCWashington45 mi
Franklin Regional AirportFKNFranklin, VAIsle Of Wight46 mi
Tri-County at Henry Joyner FieldASJAhoskie, NCHertford51 mi
Hyde County Airport7W6Engelhard, NCHyde53 mi
Martin County AirportMCZWilliamston, NCMartin60 mi
Newport News/Williamsburg International AirportPHFNewport News, VANewport News60 mi

Other Cities Served by Matthew

Services Offered

Common maintenance on the aircraft Matthew works on, at your hangar, tie-down or FBO.

Cabin floor of a Beechcraft V35B Bonanza with the seats and floor panels removed for an annual inspection

Inspections

2 services
  • Progressive Inspections
  • Phase Inspections
Close-up of a turboprop's four-blade propeller, spinner and exhaust stack, its engine cowling open

Repairs

2 services
  • AOG Aircraft Repairs
  • Engine Troubleshooting and Repair
Mechanic working on the exposed engine of a light aircraft

Servicing

4 services
  • Lubrication & Servicing
  • Landing Gear Servicing
  • Flight Control Rigging
  • Timed Component Replacement
Light aircraft instrument panel with a glass flight display, seen from the pilot's seat

Other Services

2 services
  • STC Installations
  • Part 135 Maintenance

Aircraft Types

Matthew works on jet aircraft and helicopters, including Gulfstream, Bombardier, Dassault, Cessna, Boeing and Embraer, at your hangar, tie-down or FBO.

Close-up of a business jet's engine nacelle

Jet Aircraft

  • Gulfstream
  • Bombardier
  • Dassault
  • Cessna
  • Boeing
  • Embraer
Technician wiping down a helicopter tail rotor blade in a hangar

Rotorcraft

  • Robinson
  • Bell
  • Airbus Helicopters

Mechanic Bio

Matthew is an independent A&P mechanic based in Elizabeth City, NC. Matthew has 5+ years on jet aircraft and helicopters and works at your hangar, tie-down or FBO up to 60 miles from Elizabeth City.

Certificates & Experience

  • A&P Certified Mechanic
  • 5+ years experience

Reviews

No reviews yet. Has Matthew worked on your aircraft?

Help Matthew. Leave a review.

Questions Owners Ask About Matthew

An annual inspection has to be signed off by a mechanic with an Inspection Authorization (IA). Matthew's listing doesn't show an IA, so ask about the annual when you send your request, or look for a mechanic with an IA on the North Carolina page.

Matthew travels up to 60 miles from Elizabeth City, NC. That covers 16 public airports, the nearest Elizabeth City CG Air Station/Regional (ECG), 5 miles away. Search the list for yours. The work is done where the aircraft is: your hangar, tie-down or FBO.

Jet (Gulfstream, Bombardier, Dassault and others) and rotorcraft (Robinson, Bell, Airbus Helicopters and others).

Send a maintenance request with your aircraft, where it is and what it needs. Free and takes about 2 minutes. Mechanics contact you directly.

No. Matthew is an independent mechanic listed on Phalanx Aviation, a marketplace that connects aircraft owners with independent A&P mechanics. Matthew does the work and sets the price.

This listing was submitted by Matthew or published with their permission, reviewed by Phalanx Aviation before going live, and never scraped from FAA records or other directories. How listings work · Is this your listing? Edit it on Grease Pilot

Request Maintenance — Elizabeth City, NC

Free and takes about 2 minutes. Mechanics contact you directly.

Up to 25 MB per file. JPG, PNG, WebP, HEIC, PDF, TXT, DOC, DOCX. Photos are automatically resized for faster upload.

We'll set up a free Phalanx account with this email so you can track your request.

By submitting this form, you understand, have read, and agree to our Privacy Policy and Terms & Conditions.

Mechanics Near Elizabeth City

More independent mechanics who serve Elizabeth City: Pro Members first, then the nearest.