A turboprop's polished four-blade propeller and open engine cowling below its cabin windows, in a hangar

Ernie

Ernie is an independent mobile A&P mechanic in Knoxville, TN. Ernie works on piston aircraft and helicopters up to 60 miles from Knoxville.

Knoxville, TN home baseUp to 60 miles service area

Service Area

Ernie is based in Knoxville, Tennessee and provides mobile aircraft maintenance up to 60 miles away. The nearest airport is Knoxville Downtown Island Airport (DKX), 3 miles away. Below are the airports serviced by Ernie, nearest first.

Home base
Knoxville, TN
Service area
Up to 60 miles
FAA VFR sectional chart centered on Knoxville, TN, Ernie's home base, marked with a Phalanx Aviation pin, near Knoxville Downtown Island Airport (DKX). The chart shows the airports and airspace around Knoxville.
Ernie Service Area MapFAA VFR sectional chart · not for navigationView larger

Airports Serviced by Ernie

The 16 public airports within 60 miles of Ernie's base in Knoxville, TN, nearest first
AirportIDTownCountyMiles from Knoxville
Knoxville Downtown Island AirportDKXKnoxville, TNKnox3 mi
McGhee Tyson AirportTYSKnoxville, TNBlount11 mi
Gatlinburg-Pigeon Forge AirportGKTSevierville, TNSevier23 mi
Colonel Tommy C Stiner AirfieldJAUJacksboro, TNCampbell29 mi
Moore-Murrell AirportMORMorristown, TNHamblen34 mi
The New Tazewell/Wayne Coffey Municipal Airport3A2Tazewell, TNClaiborne37 mi
Monroe County AirportMNVMadisonville, TNMonroe39 mi
Rockwood Municipal AirportRKWRockwood, TNMorgan43 mi
Middlesboro/Bell County Airport1A6Middlesboro, KYBell46 mi
Scott Municipal AirportSCXOneida, TNScott51 mi
McMinn County AirportMMIAthens, TNMc Minn53 mi
Western Carolina Regional AirportRHPAndrews, NCCherokee53 mi
McCreary County Airport18IPine Knot, KYMc Creary57 mi
Macon County Airport1A5Franklin, NCMacon58 mi
Jackson County Airport24ASylva, NCJackson60 mi
Williamsburg-Whitley County AirportBYLWilliamsburg, KYWhitley60 mi

Services Offered

Common maintenance on the aircraft Ernie works on, at your hangar, tie-down or FBO.

Cabin floor of a Beechcraft V35B Bonanza with the seats and floor panels removed for an annual inspection

Inspections

5 services
  • Annual Inspections
  • 100-Hour Inspections
  • Pre-Purchase Inspections
  • Progressive Inspections
  • Borescope Inspections
Close-up of a turboprop's four-blade propeller, spinner and exhaust stack, its engine cowling open

Repairs

4 services
  • AOG Aircraft Repairs
  • Engine Troubleshooting and Repair
  • Engine Overhauls
  • Sheet Metal Repair
Mechanic working on the exposed engine of a light aircraft

Servicing

3 services
  • Lubrication & Servicing
  • Flight Control Rigging
  • Timed Component Replacement
Light aircraft instrument panel with a glass flight display, seen from the pilot's seat

Other Services

2 services
  • STC Installations
  • AD Compliance

Aircraft Types

Ernie works on piston aircraft and helicopters, including Cessna, Piper, Beechcraft, Cirrus, Mooney and Robinson, at your hangar, tie-down or FBO.

Close-up of a piston aircraft engine's cylinders, rocker covers and fuel lines

Piston Aircraft

  • Cessna
  • Piper
  • Beechcraft
  • Cirrus
  • Mooney
Technician wiping down a helicopter tail rotor blade in a hangar

Rotorcraft

  • Robinson
  • Bell
  • Airbus Helicopters

Mechanic Bio

Ernie is an independent A&P mechanic based in Knoxville, TN. Ernie has 3+ years on piston aircraft and helicopters and works at your hangar, tie-down or FBO up to 60 miles from Knoxville.

Certificates & Experience

  • A&P Certified Mechanic
  • 3+ years experience

Reviews

No reviews yet. Has Ernie worked on your aircraft?

Help Ernie. Leave a review.

Questions Owners Ask About Ernie

An annual inspection has to be signed off by a mechanic with an Inspection Authorization (IA). Ernie's listing doesn't show an IA, so ask about the annual when you send your request, or look for a mechanic with an IA on the Tennessee page.

Ernie travels up to 60 miles from Knoxville, TN. That covers 16 public airports, the nearest Knoxville Downtown Island Airport (DKX), 3 miles away. Search the list for yours. The work is done where the aircraft is: your hangar, tie-down or FBO.

Piston (Cessna, Piper, Beechcraft and others) and rotorcraft (Robinson, Bell, Airbus Helicopters and others).

Send a maintenance request with your aircraft, where it is and what it needs. Free and takes about 2 minutes. Mechanics contact you directly.

No. Ernie is an independent mechanic listed on Phalanx Aviation, a marketplace that connects aircraft owners with independent A&P mechanics. Ernie does the work and sets the price.

This listing was submitted by Ernie or published with their permission, reviewed by Phalanx Aviation before going live, and never scraped from FAA records or other directories. How listings work · Is this your listing? Edit it on Grease Pilot

Request Maintenance — Knoxville, TN

Free and takes about 2 minutes. Mechanics contact you directly.

Up to 25 MB per file. JPG, PNG, WebP, HEIC, PDF, TXT, DOC, DOCX. Photos are automatically resized for faster upload.

We'll set up a free Phalanx account with this email so you can track your request.

By submitting this form, you understand, have read, and agree to our Privacy Policy and Terms & Conditions.

Mechanics Near Knoxville

More independent mechanics who serve Knoxville: Pro Members first, then the nearest.