Jonathan
Laramie, WY
- Certs
- A&P
- Aircraft
- Piston
- Service area
- 60 Miles
- Experience
- 5+ Years

Find qualified A&P mechanics in Wyoming for piston, turbo prop, jet, and rotorcraft maintenance. Mobile mechanics come directly to your aircraft. Serving aircraft owners from Cheyenne to Casper, Jackson to Sheridan, and everywhere in between.
Free and takes about 2 minutes. Mechanics contact you directly.
15 independent A&P mechanics serve Wyoming: 1 based here, and 14 from nearby states whose service area reaches Wyoming.
15 of 15 mechanics
Laramie, WY
Laporte, CO
New Raymer, CO
Fort Collins, CO
Franklin, ID
Ogden, UT
Logan, UT
Logan, UT
Woods Cross, UT
Idaho Falls, ID
Laurel, MT
Fort Morgan, CO
Broomfield, CO
Highlands Ranch, CO
Aberdeen, SD
All 15 listings for Wyoming were submitted by the mechanics or published with their permission, reviewed by Phalanx Aviation before going live, and never scraped from FAA records or other directories. How listings work
Independent A&P mechanics listed in Wyoming work on every major aircraft type. Whether you fly a single-engine piston or a multi-engine jet, you can find a qualified mechanic to service your aircraft.
Independent A&P mechanics offer these services on-site across Wyoming: at your hangar, FBO or tie-down, at any of the 42 public airports in Wyoming.




Wyoming has 42 public airports in the FAA's data. Independent mechanics in the Phalanx network come to aircraft at any of them, and at private strips, hangars and tie-downs. Fields with a four-letter ICAO code, usually the larger ones, are listed first, by town.
Pick a mechanic from the cards above: each one shows their certificates, the aircraft they work on and how far they travel. Or send one request. Mechanics contact you directly.
Local tip: Flying from Wyoming's high-elevation fields, ask for an engine power and fuel-flow check with your annual.

Frequently asked questions about mobile aircraft maintenance in Wyoming.
Yes. Any mechanic in the Phalanx Aviation network who holds an Inspection Authorization (IA) can perform and sign off your annual inspection on-site under 14 CFR Part 43 — at your hangar at Jackson Hole (JAC), Casper (CPR), Cheyenne (CYS), or anywhere in Wyoming — with no ferry flight to a shop required.
An A&P (Airframe & Powerplant) mechanic is certified to perform and return to service most maintenance and repairs. An IA (Inspection Authorization) is an additional FAA authorization an experienced A&P can earn that permits signing off annual inspections and major repairs. For an annual you need an IA; for most other maintenance an A&P is sufficient.
Yes. Jackson Hole (JAC) — the only commercial airport in the U.S. inside a national park — draws heavy private-jet traffic to Grand Teton and the ski resorts, with demanding high-elevation and mountain conditions. Mechanics in our Wyoming network are experienced with the jets and turboprops that fly there and travel on-site for scheduled work and AOG support.
Wyoming has one of the highest mean elevations of any state, and fields like Jackson Hole (JAC) sit well above 6,000 feet, pushing density altitude up sharply in summer. A&P mechanics in our network understand high-density-altitude operations and the demands they place on aircraft during inspections and service.
Submit an AOG maintenance request and we prioritize dispatch to your location. With mechanics around Cheyenne, Casper, Jackson, and Sheridan, an A&P can often reach your aircraft faster than a single shop across the state's wide distances.
Our Wyoming network includes mechanics for piston, turboprop, turbine/jet, and rotorcraft — including the heavy resort-jet traffic at Jackson Hole and the ranch and energy aircraft across the state. Mechanics are experienced across King Air, Citation, Gulfstream, and similar platforms.
